News — Ceiling

How do I wire a replacement ceiling fan on a 3-way circuit? I have four supply wires; red, white, black and ground. Do I just hook it up the way the old fan was wired or is there any rewiring i need to do in the fan itself? The old fan was wired; ground to ground, black to black, white to white and red to blue. The wall switches are two 3-way switches with the fan in the middle. The switches supply power to the fan then you control the light and fan with the pull strings on the fan...

Newb so be gentle. I installed a fan that doesn't seem to be wired for a separate fan and light switch at the wall, so I capped off the red wire from the ceiling at the fan, and installed the fan black/white/ground as per the instructions. (it comes with a remote to turn on the fan) The light works at the wall on both switches, but as expected, the fan doesn't. I want to install a wall control that operates 3 fan speeds and the light dimmer at the wall, similar to the remote, but there are specific instructions with...

Newb so be gentle. I installed a fan that doesn't seem to be wired for a separate fan and light switch at the wall, so I capped off the red wire from the ceiling at the fan, and installed the fan black/white/ground as per the instructions. (it comes with a remote to turn on the fan) The light works at the wall on both switches, but as expected, the fan doesn't. I want to install a wall control that operates 3 fan speeds and the light dimmer at the wall, similar to the remote, but there are specific instructions with...