Climbing Merit Badge Helps and Documents

Posted by admin on

Climbing Merit Badge

Climbing is an exhilarating activity that requires strength, skill, and courage. It can be a great way to challenge yourself and push your limits while also enjoying the beauty of the outdoors. For those who are interested in pursuing this activity, the Boy Scouts of America offer the Climbing merit badge as a way to develop important climbing skills and safety knowledge.

The Climbing merit badge is one of the many badges offered by the Boy Scouts of America. It is designed to help Scouts learn how to safely climb and rappel on rock faces or indoor climbing walls. To earn this badge, Scouts must demonstrate their knowledge of safety equipment, knot tying, and climbing techniques.

The requirements for the Climbing merit badge are designed to be challenging, but achievable. Scouts must first think about safety. They must also learn about the different types of climbing equipment, such as ropes, harnesses, and carabiners, and how to use them safely.

Once Scouts have mastered the basics of climbing safety, they can start working on their climbing skills. This includes learning how to tie different types of knots and how to belay a climber. Scouts will also learn about the different types of climbing, such as top-roping, lead climbing, and bouldering.

In addition to the technical skills required for climbing, Scouts must also learn about the environmental impact of climbing. They will be taught about Leave No Trace principles and how to minimize their impact on the environment while climbing. This includes using proper waste disposal techniques and respecting the natural surroundings.

One of the most rewarding aspects of earning the Climbing merit badge is the opportunity to push yourself and achieve personal goals. Climbing requires a great deal of physical and mental strength, as well as the ability to stay calm under pressure. By completing the requirements for this badge, Scouts will develop these important skills while also building their confidence and self-esteem.

The Climbing merit badge is a great way for Scouts to explore the world of climbing and develop important skills that will serve them well throughout their lives. Whether you are a seasoned climber or just starting out, this badge offers a great opportunity to learn about the sport of climbing and push yourself to new heights.

Share this:

Answers and Helps for the Climbing Merit Badge

Help with Answers for the Climbing Merit Badge

Find specific helps for the Climbing merit badge requirements listed on this page. Some of these resources will just give the answers. Others will provide engaging ways for older Scouts to introduce these concepts to new Scouts.

Ask Scouter Mom a question or share your ideas with others

Climbing Merit Badge Requirement 1: Hazards and First Aid

Do the following:
(a) Explain to your counselor the most likely hazards you may encounter while participating in climbing and rappelling activities and what you should do to anticipate, help prevent, mitigate, and respond to these hazards.
(b) Show that you know first aid for and how to prevent injuries or illnesses that could occur during climbing activities, including heat and cold reactions, dehydration, stopped breathing, sprains, abrasions, fractures, rope burns, blisters, snakebite, and insect bites or stings.
(c) Identify the conditions that must exist before performing CPR on a person

Climbing Merit Badge Requirement 1 Helps and Answers

Climbing and rappelling are thrilling outdoor activities that can be very rewarding, but they also come with certain risks and hazards. In order to stay safe while participating in these activities, it’s important to anticipate, help prevent, mitigate, and respond to these hazards. Here are some common hazards that you might encounter while climbing and rappelling and what you can do to stay safe:

  1. Falls – Falls are one of the biggest risks associated with climbing and rappelling. To help prevent falls, always use a safety harness and appropriate safety equipment. Make sure that all equipment is in good condition, and double-check knots and belay systems before climbing or rappelling. In the event of a fall, remain calm and follow the proper emergency procedures.
  2. Rockfall – Rockfall occurs when rocks become dislodged from the climbing surface and fall. To anticipate and prevent rockfall, always wear a helmet and avoid climbing or rappelling in areas where there is loose rock. Keep a safe distance from other climbers and rappellers, and be aware of your surroundings at all times.
  3. Weather – Weather can change quickly and can pose a hazard while climbing or rappelling. Be sure to check the weather forecast before starting your climb, and be prepared for changing conditions by bringing appropriate clothing and gear. If conditions become unsafe, be prepared to retreat to a safe area and wait out the weather.
  4. Fatigue – Climbing and rappelling can be physically demanding, and fatigue can increase your risk of accidents. To prevent fatigue, take breaks as needed, hydrate regularly, and pace yourself. If you become too fatigued to continue safely, stop and rest or turn back.
  5. Equipment Failure – Equipment failure can occur if equipment is not properly maintained or is used beyond its useful life. To prevent equipment failure, always inspect your equipment before use and replace any worn or damaged gear. It’s also important to use equipment only for its intended purpose.
  6. Human Error – Human error, such as miscommunication, misjudgment, or failure to follow proper procedures, can also pose a hazard while climbing or rappelling. To prevent human error, make sure that everyone involved in the activity is properly trained and follows established procedures. Double-check all knots and belay systems, and communicate clearly and effectively with your climbing partners.

Climbing and rappelling can be incredibly rewarding activities, but they also come with certain risks and hazards. To stay safe while working on the Climbing merit badge, anticipate and help prevent these hazards by using appropriate safety equipment, inspecting your equipment, checking weather conditions, pacing yourself, and communicating effectively. In the event of a hazard, be prepared to respond appropriately by following established emergency procedures and remaining calm. With the right preparation and mindset, you can enjoy climbing and rappelling safely and confidently. Know this information before doing the other requirements for the Climbing merit badge.

Climbing Merit Badge Requirement 2: Outdoor Ethics

Learn the Leave No Trace principles and Outdoor Code, and explain what they mean.

Climbing Merit Badge Requirement 2 Helps and Answers

Leave No Trace

These principles are important for Scouts working on the Climbing merit badge to follow in order to minimize their impact on the environment while climbing. Here are some ways that the Leave No Trace principles relate to climbing:

  1. Plan ahead and prepare – Before heading out on a climbing trip, climbers should research the area they will be climbing in and prepare for the trip accordingly. This includes packing out all trash and waste, bringing appropriate gear and clothing, and understanding the local regulations and guidelines.
  2. Travel and camp on durable surfaces – Climbers should stay on established trails and use designated campsites whenever possible. This helps to prevent erosion and other damage to the natural environment.
  3. Dispose of waste properly – All trash, including food waste and human waste, should be packed out and disposed of properly. This helps to prevent pollution and minimize the impact on wildlife.
  4. Leave what you find – Climbers should leave natural features, such as rocks and plants, in their natural state. This helps to preserve the natural environment for future generations.
  5. Minimize campfire impact – Campfires can cause damage to the natural environment, so climbers should only build fires in designated areas and follow local regulations for campfires.
  6. Respect wildlife – Climbers should avoid disturbing wildlife and their habitats. This includes keeping a safe distance from animals and minimizing noise.
  7. Be considerate of other visitors – Climbers should be respectful of other visitors to the area, including other climbers and hikers. This includes following established rules and guidelines for the area and being courteous to others.

By following these Leave No Trace principles, Scouts working on the Climbing merit badge can help to minimize their impact on the natural environment and preserve the beauty of the outdoors for future generations.

[TAG3]

The Outdoor Code

The Outdoor Code is a set of principles developed by the Boy Scouts of America to promote responsible outdoor behavior and to protect the natural environment. The Outdoor Code encourages individuals to be mindful of their actions and to take steps to minimize their impact on the environment while enjoying outdoor activities. The Outdoor Code relates directly to the Climbing merit badge as climbing is an outdoor activity that has the potential to impact the natural environment. Here are some ways that the Outdoor Code relates to the Climbing merit badge:

  1. Be clean in your outdoor manners – Climbers should be mindful of their impact on the environment and take steps to minimize their impact, including packing out all trash and waste.
  2. Be careful with fire – Climbers should follow local regulations for campfires and be mindful of the potential impact that fires can have on the environment.
  3. Be considerate in the outdoors – Climbers should be respectful of other visitors to the area, including other climbers and hikers, and follow established rules and guidelines for the area.
  4. Be conservation-minded – Climbers should be mindful of their impact on the environment and take steps to preserve the natural environment for future generations.
  5. Leave no trace – Climbers should follow Leave No Trace principles to minimize their impact on the natural environment while climbing.

Climbing Merit Badge Requirement 3: Clothing

Present yourself properly dressed for belaying, climbing, and rappelling (i.e., appropriate clothing, footwear, and a helmet; rappellers can also wear gloves).

Climbing Merit Badge Requirement 3 Helps and Answers


Proper dressing for belaying, climbing, and rappelling is essential for comfort, safety, and performance. Here are some tips on how to properly dress for the Climbing merit badge:

  1. Wear appropriate clothing – Wear comfortable and appropriate clothing that is suitable for the weather and the activity. Clothing should be breathable, flexible, and allow for a full range of motion.
  2. Wear proper footwear – Wear proper climbing or hiking shoes that provide good traction, support, and protection.
  3. Wear a climbing helmet – Always wear a properly fitting climbing helmet to protect your head from impacts and falling debris.
  4. Wear climbing gloves – Wear climbing gloves to protect your hands and provide extra grip when handling ropes and equipment.
  5. Wear a climbing harness – Wear a properly fitting climbing harness that is designed for the specific activity you are doing, such as sport climbing, trad climbing, or rappelling.
  6. Use a chalk bag – Use a chalk bag to keep your hands dry and improve your grip on the rock or rope.
  7. Use sun protection – Wear sunscreen, a hat, and sunglasses to protect your skin and eyes from the sun’s harmful rays.
  8. Layer appropriately – Layer your clothing appropriately to stay comfortable in changing weather conditions. Consider bringing a lightweight rain jacket or windbreaker in case of sudden weather changes.

Climbing Merit Badge Requirement 4: Location

Do the following:
(a) Explain how the difficulty of climbs is classified, and apply classifications to the rock faces or walls where you will demonstrate your climbing skills.
(b) Explain the following: top-rope climbing, lead climbing, and bouldering.
(c) Evaluate the safety of a particular climbing area. Consider weather, visibility, the condition of the climbing surface, and any other environmental hazards.
(d) Determine how to summon aid to the climbing area in case of an emergency.

Climbing Merit Badge Requirement 4 Helps and Answers

Difficulty of Climbs

Understanding the classification of climbing difficulty is crucial for climbers to assess the risks and challenges involved in a climb. As part of the Climbing merit badge, Scouts are required to learn how the difficulty of climbs is classified and apply those classifications to the rock faces or walls where they will demonstrate their climbing skills.

  • Class 1: Hiking. Hands are not needed for balance.
  • Class 2: Simple scrambling. Hands may be used now and then for balance. A rope is not needed, although one may be carried.
  • Class 3: Scrambling. Using the hands and some basic climbing skills. A rope may be used to belay any party members uncomfortable with the exposure.
  • Class 4: Climbing with a belay. Climbers should be protected with a belay rope.
  • Class 5: Roped climbing with protection. Class 5 climbing is divided into 14 categories of difficulty based on the Yosemite Decimal System, which is the North American rating system. They range from 5.1 (very easy) to 5.15 (extremely difficult). Class 5 climbers ascending with their feet more than shoulder-height above the ground must always be protected with a belay rope.

To apply these classifications to the rock faces or walls where you will demonstrate your climbing skills for the Climbing merit badge, you will need to assess the technical difficulty, steepness, and length of the climb. This will typically involve a combination of visual inspection and research to determine the classification of the climb. Here are some steps you can take to apply classifications to the rock faces or walls where you will demonstrate your climbing skills:

  1. Research the area – Before attempting a climb, do some research on the area to learn about the routes and their ratings. This can include reading guidebooks, consulting with local climbing shops or experts, and checking online resources.
  2. Assess the climb – Once you have identified a climb you want to attempt, assess the technical difficulty, steepness, and length of the climb. This may involve inspecting the rock face or wall and taking note of any particularly challenging sections.
  3. Consult with others – If you are unsure about the classification of a climb, consult with other climbers who have experience in the area. They may be able to offer insights into the difficulty level of the climb and provide guidance on how to approach it.
  4. Use the rating system – Once you have assessed the climb, use the YDS or another rating system to classify the climb. This will help you to communicate the difficulty level of the climb to others and to track your progress as you improve your climbing skills.

It’s important to remember that classifications are subjective and can vary depending on factors such as personal experience, weather conditions, and equipment used. When attempting a climb for the Climbing merit badge, always use your own judgement and be aware of your own limitations to ensure a safe and enjoyable climbing experience.

Top-Rope Climbing

Top-rope climbing is a form of climbing in which the climber is attached to a rope that runs from the climber, up through an anchor at the top of the climb, and back down to a belayer on the ground. The rope is kept taut by the belayer, which helps to prevent falls. Top-rope climbing is typically done on relatively easy routes, and is a good option for beginner climbers or those who want to practice their technique on more challenging routes without the added danger of falling.

Lead Climbing

Lead climbing is a more advanced form of climbing in which the climber attaches the rope to protection points as they climb, rather than being attached to a rope that is already in place. The rope is carried up with the climber and attached to protection points, such as bolts or cams, as they ascend. The belayer takes in slack as the climber ascends, and catches the climber in the event of a fall. Lead climbing is more challenging and requires a higher level of skill and experience than top-rope climbing.

Bouldering

Bouldering is a form of climbing that is done on shorter routes, typically no more than 20 feet high, without the use of ropes or other safety equipment. Instead, climbers use pads or mattresses to protect against falls. Bouldering routes are typically more difficult than top-rope routes, and require a high level of skill and technique. Bouldering is a popular form of climbing because it can be done indoors or outdoors and doesn’t require a lot of equipment.

Climbing Merit Badge Requirement 5: Verbal Signals

Explain the importance of using verbal signals during every climb and rappel, and while bouldering. With the help of the merit badge counselor or another Scout, demonstrate the verbal signals used by each of the following:
(a) Climbers
(b) Rappellers
(c) Belayers
(d) Boulderers and their spotters

Climbing Merit Badge Requirement 5 Helps and Answers

Verbal Signals Used by Climbers

Climbers use verbal signals to communicate with each other during climbs. These signals are important for ensuring safety and efficiency during the climb, as they help climbers to communicate effectively without the need for visual or physical cues. Here are some of the most common verbal signals climbers will use for the Climbing merit badge:

  1. On belay – This signal is used by the climber to indicate that they are ready to climb and need to be secured by the belayer.
  2. Belay on – This signal is used by the belayer to indicate that they have secured the climber and are ready to belay them.
  3. Climbing – This signal is used by the climber to indicate that they are starting the climb.
  4. Climb on – This signal is used by the belayer to indicate that the climber has their attention and is free to start climbing.
  5. Slack – This signal is used by the climber to indicate that they need more slack in the rope.
  6. Take – This signal is used by the climber to indicate that they need the belayer to take in slack in the rope.
  7. Fall – This signal is used by the climber to indicate that they have fallen and need to be caught by the belayer.
  8. Lowering – This signal is used by the belayer to indicate that they are lowering the climber down the rope.
  9. Off belay – This signal is used by the climber to indicate that they have reached the top of the climb and no longer need to be secured by the belayer.

Verbal Signals Used by Rappellers

Rappelling is an essential skill for climbers, allowing them to safely descend from a climb. Like climbers, rappellers also use verbal signals to communicate with each other during the rappel. These signals are important for ensuring safety and efficiency during the rappel, as they help rappellers to communicate effectively without the need for visual or physical cues. Here are some of the most common verbal signals rappellers will use for the Climbing merit badge:

  1. On rappel – This signal is used by the rappeller to indicate that they are ready to begin the rappel.
  2. Rappel on – This signal is used by the belayer to indicate that they have secured the rappeller and are ready for them to begin the rappel.
  3. Rappelling – This signal is used by the rappeller to indicate that they are starting the rappel.
  4. Off rappel – This signal is used by the rappeller to indicate that they have reached the bottom of the rappel and are no longer rappelling.
  5. Stop – This signal is used by the rappeller to indicate that they need the belayer to stop the rope.
  6. Slow – This signal is used by the rappeller to indicate that they need the belayer to slow down the rope.
  7. Lower – This signal is used by the belayer to indicate that they are lowering the rappeller down the rope.
  8. Safety – This signal is used by the rappeller to indicate that they have reached a safe point on the rappel and can take a break or rest.
  9. Clear – This signal is used by the rappeller to indicate that they have reached a clear area at the bottom of the rappel and the next person can begin their descent.

Verbal Signals Used by Belayers

Belayers use verbal signals to communicate with climbers during the climb. These signals are important for ensuring safety and efficiency during the climb, as they help belayers to communicate effectively without the need for visual or physical cues. Here are some of the most common verbal signals belayers will use for the Climbing merit badge:

  1. Climbing – This signal is used by the climber to indicate that they are starting the climb.
  2. Climb on – This signal is used by the belayer to indicate that the climber has their attention and is free to start climbing.
  3. Slack – This signal is used by the climber to indicate that they need more slack in the rope.
  4. Take – This signal is used by the climber to indicate that they need the belayer to take in slack in the rope.
  5. Up rope – This signal is used by the belayer to indicate that the climber needs to pull up the rope.
  6. Watch me – This signal is used by the climber to indicate that they are attempting a difficult move and the belayer should pay close attention.
  7. Lowering – This signal is used by the belayer to indicate that they are lowering the climber down the rope.
  8. Off belay – This signal is used by the climber to indicate that they have reached the top of the climb and no longer need to be secured by the belayer.
  9. Tension – This signal is used by the belayer to indicate that they need the climber to create tension on the rope.

Verbal Signals Used by Boulderers and Their Spotters

Bouldering is a form of climbing that is typically done on shorter routes, without the use of ropes or other safety equipment. Because bouldering is often done at ground level or close to the ground, climbers will typically have a spotter to help prevent falls and ensure safety. Both boulderers and their spotters use verbal signals to communicate with each other during bouldering. Here are some of the most common verbal signals boulderers and their spotters will use for the Climbing merit badge:

  1. Climbing – This signal is used by the boulderer to indicate that they are starting the boulder problem.
  2. Spotting – This signal is used by the spotter to indicate that they are in position and ready to assist the boulderer if needed.
  3. Up – This signal is used by the spotter to indicate that the boulderer needs to climb higher.
  4. Down – This signal is used by the spotter to indicate that the boulderer needs to climb down.
  5. Watch out – This signal is used by the spotter to warn the boulderer of potential hazards or obstacles on the ground.
  6. Falling – This signal is used by the boulderer to indicate that they are falling and need the spotter to assist them.
  7. Gotcha – This signal is used by the spotter to indicate that they have successfully caught the boulderer and prevented a fall.
  8. Take a break – This signal is used by the boulderer to indicate that they need to rest or take a break.

Climbing Merit Badge Requirement 6: Rope

Do the following:
(a) Describe the kinds of rope acceptable for use in climbing and rappelling.
(b) Show how to examine a rope for signs of wear or damage.
(c) Discuss ways to prevent a rope from being damaged.
(d) Explain when and how a rope should be retired.
(e) Properly coil a rope

Climbing Merit Badge Requirement 6 Helps and Answers

Types of Rope

Selecting the right rope is crucial for both climbing and rappelling, as it is the primary means of safety for the climber. Ropes used for the Climbing merit badge must be strong, durable, and able to withstand the stresses of these activities. Here are the kinds of rope acceptable for use in climbing and rappelling:

  1. Dynamic Rope – Dynamic ropes are the most commonly used ropes for climbing and rappelling. They are designed to stretch when a climber falls, which helps to absorb the shock of the fall and reduce the risk of injury. Dynamic ropes are typically made from nylon and come in a variety of lengths and thicknesses. They are designed to be used with a dynamic belay device that helps to control the rope and prevent falls.
  2. Static Rope – Static ropes are not designed to stretch when a climber falls. They are primarily used for rappelling, as they provide a more stable platform for descending. Static ropes are typically made from polyester and are less elastic than dynamic ropes. They are often thicker and heavier than dynamic ropes and are designed to withstand the rigors of rappelling.
  3. Twin Ropes – Twin ropes are two ropes that are used together during a climb. They are typically thinner and lighter than other types of ropes and are designed to be used with a double rope technique. Twin ropes are often used in situations where a climber may need to rappel down one route while leaving the other rope in place for safety.
  4. Half Ropes – Half ropes are two ropes that are used independently of each other during a climb. They are typically thinner than twin ropes and are used in situations where a climber may need to weave the ropes through different protection points. Half ropes are often used in traditional climbing where the route is not pre-equipped with bolts or fixed anchors.

Inspecting a Rope

Inspecting a rope for signs of wear or damage is an essential part of ensuring safety during climbing or rappelling. Here are the steps you should follow to examine a rope for signs of wear or damage for the Climbing merit badge:

  1. Uncoil the rope – Uncoil the rope completely and lay it out on a flat surface, such as the ground or a table. This will allow you to see the entire length of the rope and inspect it for signs of wear or damage.
  2. Look for cuts or abrasions – Examine the entire length of the rope for cuts or abrasions. These can be caused by sharp edges, rough surfaces, or contact with rocks or other objects. Cuts or abrasions can weaken the rope and make it more susceptible to breaking under stress.
  3. Check for soft spots – Soft spots in a rope can be a sign of internal damage or wear. Gently squeeze the rope along its entire length to feel for any soft or mushy spots. These can be a sign of damage or wear that is not visible from the outside.
  4. Look for frayed fibers – Examine the ends of the rope for frayed or loose fibers. Frayed fibers can indicate that the rope has been repeatedly subjected to stress or abrasion and may be weakened as a result.
  5. Check for discoloration – Discoloration or fading of the rope can be a sign of sun damage or exposure to chemicals. This can weaken the rope and make it more susceptible to breaking under stress.
  6. Inspect the rope’s core – If possible, inspect the rope’s core by pulling the outer sheath back at various points along the length of the rope. Look for signs of damage or wear to the core, such as cuts or abrasions.

If you notice any signs of wear or damage during the inspection, the rope should be immediately taken out of service and replaced. It’s important to regularly inspect your climbing and rappelling ropes to ensure their safety and longevity. Always consult with a qualified instructor or climbing expert if you have any questions or concerns about the condition of your ropes.

Preventing Damage

Preventing a rope from being damaged is important to ensure its longevity and to maintain its strength and safety for climbing and rappelling. Here are some steps you can take to prevent a rope from being damaged while working on the Climbing merit badge:

  1. Store the rope properly – Always store your rope in a cool, dry place, away from direct sunlight and moisture. Coiling the rope loosely and hanging it from a hook or rope bag is a good way to prevent it from becoming tangled or twisted.
  2. Protect the rope from sharp edges – Avoid running the rope over sharp edges or abrasive surfaces. This can cause cuts and abrasions, which can weaken the rope and make it more susceptible to breaking under stress.
  3. Use a rope protector – A rope protector, such as a rubber or fabric sleeve, can be used to cover the rope where it contacts sharp edges or abrasive surfaces. This can help prevent cuts and abrasions and extend the life of the rope.
  4. Inspect the rope regularly – Regularly inspect your rope for signs of wear or damage, and retire it immediately if you notice any issues. By catching problems early, you can prevent the rope from becoming further damaged and potentially dangerous to use.
  5. Clean the rope – Dirt and debris can cause wear and damage to a rope over time. Clean your rope regularly with a mild detergent and warm water, and allow it to dry completely before storing.
  6. Use proper rope-handling techniques – Proper rope-handling techniques, such as coiling and uncoiling the rope properly, can help prevent twists and kinks that can cause damage over time.

Retiring a Rope

Retiring a rope is an important part of ensuring safety while working on the Climbing merit badge. Over time, ropes can become damaged or weakened, which can increase the risk of accidents and injury. Here are some guidelines for when and how a rope should be retired:

  1. Age – Most climbing and rappelling ropes have a lifespan of 5-10 years, depending on use and storage conditions. Check the manufacturer’s recommendations for the specific rope you are using.
  2. Wear and damage – Regularly inspect your rope for signs of wear or damage, such as cuts, abrasions, frayed fibers, or soft spots. If you notice any of these signs, retire the rope immediately.
  3. Exposure to chemicals or heat – Exposure to chemicals or heat can weaken a rope and make it more susceptible to breaking under stress. If your rope has been exposed to any chemicals or heat sources, retire it immediately.
  4. Frequency of use – The more a rope is used, the faster it will wear out. If you are using your rope frequently, inspect it more often and retire it sooner.

When retiring a rope, it’s important to cut it into smaller pieces to prevent someone from unknowingly using it. This also helps to prevent it from being mistaken for a usable rope and being put back into service.

When disposing of the rope, it’s important to do so in an environmentally responsible way. Check with your local waste management facility for guidelines on how to dispose of climbing and rappelling ropes safely.

Coiling a Rope

Coiling a rope properly is important for keeping it organized, preventing tangling, and extending its lifespan. Here are the steps to properly coil a rope for the Climbing merit badge.

  1. Find the center of the rope – Fold the rope in half to find the center point. This will help you to start coiling the rope evenly.
  2. Start the coil – Hold the center point of the rope with one hand and use the other hand to create the first loop by bringing the end of the rope over the center point and back under it. The loop should be large enough to fit your hand through.
  3. Continue coiling – Hold the loop you just made with your non-dominant hand and use your dominant hand to make the next loop in the opposite direction, so the coils are stacked evenly.
  4. Keep the coils flat – Keep the coils flat and untwisted as you continue to coil the rope.
  5. Coil to the end – Continue coiling the rope until you reach the end.
  6. Secure the coil – When you reach the end, wrap the end of the rope around the coil and tie it off with a figure-eight knot. This will keep the coil secure and prevent it from unraveling.
  7. Hang or store the coil – Hang the coil from a hook or store it in a rope bag to keep it organized and prevent it from becoming tangled.

Climbing Merit Badge Requirement 7: Knots

Demonstrate the ability to tie each of the following knots. Give at least one example of how each knot is used in belaying, climbing, or rappelling.
(a) Figure eight on a bight
(b) Figure eight follow-through
(c) Water knot
(d) Double fisherman’s knot (grapevine knot)
(e) Safety knot

Climbing Merit Badge Requirement 7 Helps and Answers

Figure Eight on a Bight

A figure eight on a bight is a knot used in rock climbing and rappelling to create a secure and stable loop in a rope. It is created by forming a loop in the middle of the rope, folding the loop in half, and then tying a figure-eight knot in the bight of the loop. The resulting loop can be used to attach a climbing rope to an anchor point, or to create a secure attachment point for a climber or rappeller working on the Climbing merit badge.

To tie a figure eight on a bight, follow these steps:

  1. Form a loop – Create a large loop in the middle of the rope, making sure that the two sides of the loop are roughly equal in length.
  2. Fold the loop – Fold the loop in half, so that the two sides of the loop are side by side.
  3. Tie the knot – Tie a figure-eight knot in the bight of the loop, making sure that the knot is tight and secure.
  4. Dress the knot – Tighten the knot and dress it by pulling on the strands of the rope and arranging them neatly.

The resulting loop should be secure and stable, and can be used for a variety of purposes in climbing and rappelling.

Figure Eight Follow-through

A Figure-eight follow-through is a knot used in rock climbing and rappelling to create a secure and stable connection between a climbing rope and an anchor point or another piece of gear. It is considered one of the essential knots for climbers and is commonly used to tie in to a climbing rope or to attach the rope to an anchor point.

To tie a figure-eight follow-through knot, follow these steps:

  1. Form a figure-eight knot – Tie a figure-eight knot in the end of the rope, leaving a long tail of at least 10 inches.
  2. Pass the tail through the anchor point – Pass the tail of the rope through the anchor point or the piece of gear that you are attaching the rope to.
  3. Thread the tail back through the figure eight – Thread the tail of the rope back through the loops of the figure-eight knot, starting from the same side that the tail came out of in step 2.
  4. Dress the knot – Tighten the knot by pulling on both ends of the rope and make sure that the knot is dressed properly.
  5. Check the knot – Check the knot to make sure that it is secure and properly tied.

The resulting knot should be a secure and stable connection between the climbing rope and the anchor point or gear for the Climbing merit badge.

Water Knot

A water knot is a knot used to tie two ends of a flat webbing or tape together. It is commonly used in rock climbing to create slings or anchors using webbing. The knot is also known as a double fisherman’s knot or grapevine knot.

To tie a water knot, follow these steps:

  1. Overlap the two ends of the webbing or tape – Place the two ends of the webbing or tape on top of each other, with one end overlapping the other by a few inches.
  2. Tie a basic overhand knot – Tie a basic overhand knot by taking the end that is on top and looping it over the other end, then passing it back through the loop.
  3. Tie another overhand knot – Tie another overhand knot using the opposite end of the webbing, making sure that the knot is tied in the opposite direction to the first knot.
  4. Dress the knot – Tighten the knot by pulling on both ends of the webbing and make sure that the knot is dressed properly.
  5. Check the knot – Check the knot to make sure that it is secure and properly tied.

The resulting knot should be a secure and stable connection between the two ends of the webbing or tape for the Climbing merit badge.

Double Fisherman’s Knot (Grapevine Knot)

A Double Fisherman’s Knot, also known as the Grapevine Knot, is a knot used to join two ends of a rope together, such as when creating a sling or a prusik loop. It is a reliable knot that is commonly used in rock climbing, mountaineering, and other outdoor activities.

To tie a Double Fisherman’s Knot, follow these steps:

  1. Overlap the two ends of the rope – Place the two ends of the rope parallel to each other, with one end overlapping the other by a few inches.
  2. Tie a basic overhand knot – Tie a basic overhand knot by taking the end that is on top and looping it over the other end, then passing it back through the loop.
  3. Repeat with the opposite end – Tie another overhand knot using the opposite end of the rope, making sure that the knot is tied in the opposite direction to the first knot.
  4. Dress the knots – Tighten the knots by pulling on both ends of the rope and make sure that they are dressed properly.
  5. Tie a third overhand knot – Take one end of the rope and tie another overhand knot around both strands of the rope, passing it through the two loops created by the previous knots.
  6. Repeat with the other end – Tie another overhand knot using the other end of the rope, making sure that the knot is tied in the opposite direction to the previous knot.
  7. Dress the knot – Tighten the knots by pulling on both ends of the rope and make sure that they are dressed properly.

The resulting knot should be a secure and stable connection between the two ends of the rope for the Climbing merit badge.

Safety Knot

A safety knot is a knot used to create a stopper at the end of a rope, preventing it from slipping through an anchor or device. It is also called a backup knot or a stopper knot. The purpose of a safety knot is to add an extra level of safety to a climbing or rappelling system by preventing the rope from accidentally slipping through the anchor or device and causing an accident.

There are several types of safety knots, including the Figure Eight on a Bight and the Overhand Knot. To tie a safety knot, follow these general steps:

  1. Tie the primary knot – Tie the primary knot for your climbing or rappelling system, such as a figure-eight knot or a double fisherman’s knot.
  2. Leave a tail – Leave a tail of at least six inches or more.
  3. Tie the safety knot – Tie the safety knot by tying another knot at the end of the tail, such as an overhand knot or a figure-eight knot. The safety knot should be tied tightly and dressed properly.
  4. Check the knot – Check the safety knot to make sure that it is secure and properly tied.

The resulting safety knot should prevent the rope from slipping through the anchor or device for the Climbing merit badge.

Climbing Merit Badge Requirement 8: Harnesses

Correctly put on a commercially made climbing harness.

Climbing Merit Badge Requirement 8 Helps and Answers

Putting on a commercially made climbing harness correctly is essential for ensuring safety and comfort during climbing or rappelling. Here are the steps for correctly putting on a commercially made climbing harness:

  1. Undo all the straps – Before putting on the harness, loosen all the straps and unfasten any buckles.
  2. Step into the leg loops – Step into the harness, lifting each leg and placing it through the corresponding leg loop.
  3. Pull the harness up – Pull the harness up over your hips and waist until it sits comfortably and snugly.
  4. Fasten the waist buckle – Fasten the waist buckle, making sure that it is centered over your waist and snug, but not overly tight.
  5. Adjust the leg loops – Adjust the leg loops so that they fit snugly, but are not overly tight or causing discomfort.
  6. Tighten the straps – Starting with the leg loops, tighten all the straps and buckles until the harness fits snugly and securely.
  7. Double-check the fit – Double-check that the harness is properly adjusted, comfortable, and secure. The leg loops and waistband should fit snugly, but not be overly tight, and there should be no gaps or looseness in the harness.

It’s important to follow the manufacturer’s instructions for your specific harness and to practice putting it on and adjusting it before climbing or rappelling for the Climbing merit badge.

Climbing Merit Badge Requirement 9: Belaying

Do the following:
(a) Explain the importance of belaying climbers and rappellers and when it is necessary.
(b) Belay three different climbers ascending a rock face or climbing wall.
(c) Belay three different rappellers descending a rock face or climbing wall using a top rope.

Climbing Merit Badge Requirement 9 Helps and Answers

The Importance of Belaying

Belaying is an essential safety technique in rock climbing and rappelling. It involves the use of a rope system to protect the climber or rappeller in the event of a fall or slip. The belayer is responsible for controlling the rope and ensuring that the climber or rappeller remains safe at all times. You must understand this for the Climbing merit badge.

The importance of belaying climbers and rappellers cannot be overstated. Without a belay system, a fall could result in serious injury or death. A properly belayed climber or rappeller can climb or descend with confidence, knowing that they are protected from falls and accidents.

Belaying is necessary whenever a climber or rappeller is above ground level, whether it’s on a rock face, a cliff, or a building. It is also necessary when a climber or rappeller is traversing difficult or challenging terrain, or when there is a risk of falling or slipping.

A belay system typically involves the use of a belay device, such as an ATC or a Grigri, which is attached to the belayer’s harness and the rope. The belayer controls the rope by pulling it through the device, which creates friction and slows down the climber or rappeller’s descent in the event of a fall. The belayer also communicates with the climber or rappeller using verbal signals and hand signals to ensure that they remain safe and secure.

Climbing Merit Badge Requirement 10: Climbing

Do the following:
(a) Show the correct way to directly tie into a belay rope.
(b) Climb at least three different routes on a rock face or climbing wall, demonstrating good technique and using verbal signals with a belayer.

Climbing Merit Badge Requirement 10 Helps and Answers

Directly tying into a belay rope is a common technique used by climbers to attach themselves to a belay anchor or anchor point. Here are the steps to correctly tie into a belay rope for the Climbing merit badge.

  1. Choose the correct rope – Choose the correct rope for your climbing system, based on the type of climbing you are doing, the location, and the conditions.
  2. Tie a figure-eight knot – Tie a figure-eight knot in the end of the rope, leaving a tail of at least 10 inches.
  3. Thread the rope through the anchor point – Thread the rope through the belay anchor or anchor point, making sure that it is securely anchored.
  4. Tie a follow-through knot – Take the tail of the rope and thread it back through the loops of the figure-eight knot, creating a follow-through knot.
  5. Dress the knot – Tighten the knot by pulling on both ends of the rope and make sure that the knot is dressed properly.
  6. Check the knot – Check the knot to make sure that it is secure and properly tied.
  7. Attach your belay device – Attach your belay device to the rope, making sure that it is properly secured and the rope is threaded correctly through the device.

The resulting tie-in should be secure and stable, allowing you to climb with confidence and safety.

Climbing Merit Badge Requirement 11: Rappelling

Do the following:
(a) Using a carabiner and a rappel device, secure your climbing harness to a rappel rope.
(b) Tie in to a belay rope set up to protect rappellers.
(c) Rappel down three different rock faces or three rappel routes on a climbing wall. Use verbal signals to communicate with a belayer, and demonstrate good rappelling technique.

Climbing Merit Badge Requirement 11 Helps and Answers

Using a carabiner and a rappel device to secure your climbing harness to a rappel rope is an essential technique for safe and effective rappelling. Here are the steps to correctly use a carabiner and rappel device for the Climbing merit badge.

  1. Choose the correct carabiner and rappel device – Choose the correct carabiner and rappel device for your climbing system, based on the type of climbing you are doing, the location, and the conditions.
  2. Thread the rope through the rappel device – Thread the rope through the rappel device according to the manufacturer’s instructions.
  3. Attach the rappel device to your harness – Attach the rappel device to your harness using a locking carabiner, making sure that the carabiner is securely locked and properly oriented.
  4. Secure your harness to the rope – Clip a second locking carabiner through the tie-in loop of your climbing harness, and then clip the carabiner to the rappel rope.
  5. Double-check the system – Double-check the system to make sure that everything is properly attached and secured, and that the rope is threaded correctly through the rappel device.
  6. Test the system – Test the system by applying weight to the rope and making sure that the carabiners and rappel device are properly locked and functioning correctly.

Once the system is properly set up, you can begin your descent by leaning back and keeping your weight on the rope, using the rappel device to control your speed. Always maintain a firm grip on the rope and keep your eyes on your surroundings, checking for any potential hazards or obstacles.

Climbing Merit Badge Requirement 12: Storage

Demonstrate ways to store rope, hardware, and other gear used for climbing, rappelling, and belaying.

Climbing Merit Badge Requirement 12 Helps and Answers

Proper storage of climbing gear is essential to ensure its longevity, safety, and performance. Here are some tips on how to properly store rope, hardware, and other gear used for climbing, rappelling, and belaying for the Climbing merit badge.

  1. Keep gear clean and dry – Before storing your gear, make sure it is clean and dry. Dirt, moisture, and other contaminants can damage ropes, carabiners, and other gear, so it’s important to keep everything clean and dry.
  2. Store gear in a cool, dry place – Store your climbing gear in a cool, dry place that is free from moisture, direct sunlight, and extreme temperatures. Avoid storing gear in damp basements, garages, or other areas that are prone to moisture and humidity.
  3. Hang ropes – Hang ropes by draping them over a rope hanger or coiling them loosely and hanging them from a hook. Avoid sharp bends or kinks, as these can weaken the rope.
  4. Organize hardware – Organize carabiners, cams, and other hardware in a dedicated storage bin or container, using dividers or foam padding to keep everything organized and protected.
  5. Check gear regularly – Regularly inspect and check your gear for signs of wear, damage, or other issues. Replace any gear that shows signs of wear or damage, and properly dispose of any gear that is no longer safe or functional.
  6. Follow manufacturer recommendations – Follow the manufacturer’s recommendations for storing your specific gear, as different types of gear may require different storage methods.

Proper storage of climbing gear is essential for ensuring its safety and longevity, and it’s important to take the time to properly organize and store your gear after each use while working on the Climbing merit badge.

Related Resources for Climbing Merit Badge

[TAG4]

COPE (Challenging Outdoor Personal Experience) Program Feature for Scouts BSA

The COPE Troop Program Feature is highly relevant to the Climbing merit badge, as it emphasizes the importance of developing teamwork, leadership, problem-solving, and communication skills, all of which are critical for successful climbing and rappelling activities. The COPE program also promotes the principle of “challenge by choice,” which encourages Scouts to push themselves beyond their comfort zones and develop self-esteem by facing challenges individually and as a member of a team.

Additionally, the program provides training on spotting, which is an essential safety skill for belaying and climbing. Overall, the COPE Troop Program Feature can help Scouts develop the skills and confidence they need to succeed while working on the Climbing merit badge and other outdoor activities, while promoting safety, teamwork, and personal growth.

National Outdoor Awards – Adventure Segment

The Climbing merit badge may be used to fulfill the requirements for this award. For Scouts or Venturers who want to challenge themselves further and be recognized for their outdoor accomplishments, the National Outdoor Award Adventure Segment is a great option. To earn this award, participants must complete a challenging high-adventure activity such as backpacking, paddling, sailing, or climbing. Additionally, participants must complete 10 adventure activities under the auspices of the Boy Scouts of America, such as a backpacking trip lasting three or more days and covering more than 20 miles without food resupply, or a climbing activity on open rock that includes camping overnight.

The National Outdoor Award recognizes those who go beyond the basic requirements of the Climbing merit badge, encouraging participants to challenge themselves and push their limits in outdoor activities. The award provides a great incentive for Scouts and Venturers to explore and experience the outdoors in new and exciting ways.

Mountaineering Ranger Elective

By earning the Mountaineering elective, Venturers can not only expand their climbing knowledge and skills but also demonstrate their commitment to personal growth and leadership, which can be a valuable addition to their Climbing merit badge accomplishments.

Project COPE Ranger Elective

The Project COPE elective for the Venturing Ranger award can also be a valuable addition to a Venturer’s climbing experience, as it requires completing a BSA COPE course or outdoor education course that may include team building activities and ropes courses, enhancing their skills and knowledge beyond the requirements of the Climbing merit badge.